Electrolux E30MC75JSS Owners Guide - Page 19

Setting for Best Results

Page 19 highlights

Setting for Best Results 19 Lower oven rack supports & oven vents Installing Oven Rack Supports Always install oven rack support before turning on the oven (when the oven is cool). To install oven rack support, insert the supports by pushing them downward into the two brackets on each side of the oven interior, as shown below. To remove the oven rack support for a self-clean cycle, pull up the support to disengage them from the brackets. If the rack supports are not removed, the self-clean cycle won't start. Oven Rack Positions This oven is equipped with ladder rack supports with 8 positions to accommodate precisely every mode of cooking. Rack positions 8 7 6 5 4 3 2 11 Oven Vents Location The ovens are vented above their door. When the oven is on, warm air is released through the vents. This venting is necessary for proper air circulation in the oven and good baking results. Oven Vent Warm Air Oven Vent Warm Air

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76

19
Setting for Best Results
Lower oven rack supports &
oven vents
Always install oven rack support before turning
on the oven (when the oven is cool).
Rack
positions
Installing Oven Rack Supports
Oven Vents Location
The ovens are vented above their door. When the
oven is on, warm air is released through the vents.
This venting is necessary for proper air circulation
in the oven and good baking results.
Oven Vent
Oven Vent
Warm Air
Warm Air
Oven Rack Positions
This oven is equipped with ladder rack supports with
8 positions to accommodate precisely every mode
of cooking.
To install oven rack support, insert the supports by
pushing them downward into the two brackets on
each side of the oven interior, as shown below.
To remove the oven rack support for a self-clean
cycle, pull up the support to disengage them from
the brackets. If the rack supports are not removed,
the self-clean cycle won’t start.
2
3
4
5
6
7
1
1
8