Electrolux EI30EF4CQS Complete Owner's Guide (English) - Page 11

Surface Cooking

Page 11 highlights

Surface Cooking 11 Surface cooking utensils Flame size Pans should have flat bottoms. Check for flatness by rotating a ruler across the bottom. There should be no gaps between the pan and ruler. * Specialty pans such as lobster pots, griddles and pressure cookers may be used but must conform to the above recommended cookware requirements. *GOOD POOR • Curved and warped pan bottoms. • Flat bottom and straight sides. • Tight fitting lids. • Weight of handle does not tilt pan. Pan is well balanced. • Pan sizes match the amount of food to be prepared and the size of burner. • Made of material that conducts heat well. • Easy to clean. • Pan overhangs unit by more than 2.5 cm (1"). • Heavy handle tilts pan. • Flame extends beyond unit. For most cooking, start on the highest control setting and then turn to a lower one to complete the process. Use the chart below as a guide for determining proper flame size for various types of cooking. The size and type of utensil used and the amount of food being cooked will influence the setting needed for cooking. For deep fat frying, use a thermometer and adjust the surface control knob accordingly. If the fat is too cool, the food will absorb the fat and be greasy. If the fat is too hot, the food will brown so quickly that the center will be undercooked. Do not attempt to deep fat fry too much food at once as the food will neither brown nor cook properly. *Flame Size Type of Cooking High Flame Start most foods; bring water to a boil; pan broiling Medium Flame Maintain a slow boil; thicken sauces, gravies; steam Low Flame Keep foods cooking; poach; stew. *These settings are based on using mediumweight aluminum pans with lids. Settings may vary when using other types of pans. Never extend the flame beyond the outer edge of the utensil. A higher flame simply wastes heat and energy, and increases your risk of being burned by the flame. RIGHT Note: Always use a utensil for its intended purpose. Follow manufacturer's instructions. Some utensils were not made to be used in the oven or on the cooktop. WRONG

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

11
Surface Cooking
Surface cooking utensils
Flame size
RIGHT
WRONG
Note:
Always use a utensil for its intended
purpose. Follow manufacturer’s instructions. Some
utensils were not made to be used in the oven or
on the cooktop.
*GOOD
• Flat bottom
and
straight sides.
• Tight
tting lids.
• Weight of handle
does not tilt pan. Pan
is well balanced.
• Pan sizes match the
amount of food to be
prepared and the size
of burner.
• Made of material that
conducts heat well.
• Easy to clean.
POOR
• Curved and warped
pan bottoms.
• Pan overhangs unit by
more than 2.5 cm (1”).
• Heavy handle tilts pan.
• Flame extends beyond
unit.
Pans should have
at bottoms. Check for
atness by
rotating a ruler across the bottom. There should be
no gaps between the pan and ruler.
*
Specialty pans such as lobster pots, griddles and
pressure cookers may be used but must conform to
the above recommended cookware requirements.
For most cooking
, start on the highest control
setting and then turn to a lower one to complete
the process. Use the chart below as a guide for
determining proper
ame size for various types
of cooking. The size and type of utensil used and
the amount of food being cooked will in
uence the
setting needed for cooking.
For deep fat frying
,
use a thermometer and adjust
the surface control knob accordingly. If the fat is too
cool, the food will absorb the fat and be greasy. If
the fat is too hot, the food will brown so quickly that
the center will be undercooked. Do not attempt to
deep fat fry too much food at once as the food will
neither brown nor cook properly.
*Flame Size
Type of Cooking
High Flame
Start most foods; bring water to a
boil; pan broiling
Medium Flame
Maintain a slow boil; thicken
sauces, gravies; steam
Low Flame
Keep foods cooking; poach; stew.
*These settings are based on using medium-
weight aluminum pans with lids. Settings may
vary when using other types of pans.
Never extend the
ame beyond the outer edge of
the utensil. A higher
ame simply wastes heat and
energy, and increases your risk of being burned by
the
ame.