Electrolux EI30EF4CQS Complete Owner's Guide (English) - Page 40
Cleaning cooktop, burner, grates, caps and heads, IMPORTANT
View all Electrolux EI30EF4CQS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
40 Care and Cleaning Cleaning cooktop, burner grates, caps and heads Burner heads Lift the burner cap from the burner head. The surface burner heads are secured to the cooktop and must be cleaned in place. ● To avoid possible burns use care when cleaning the cooktop. DO NOT attempt to clean the cooktop whenever the cooktop or burner heads are still hot. ● To avoid possible burns DO NOT attempt any of the following cleaning instructions provided before turning OFF all of the surface burners and allow them to cool. ● To avoid possible burns DO NOT attempt to operate the surface burners without the burner caps. Your appliance is shipped with the burner heads and burner caps in the correct locations. Before using your gas appliance be sure to: ● Follow installation instructions before operating. ● Remove all packing tape from cooktop area. For proper gas flow it may be necessary to clean the burner heads and slots. To clean, first use a clean DAMP cloth to soak up any spills. Remove any food from between the burner slots using a small nonabrasive brush like a toothbrush and afterwards wipe using a damp cloth. For stubborn soils located in the slots, use a small-gauge wire or needle to clean. Should you experience ignition problems it may be that an ignition port hole is partially blocked with soil (see figs 1 & 2). With the burner head in place, use a small wire gauge needle or the end of a paper clip to clear the ignition port or ports. Slots Ignition port Burner Caps Should you ever need to remove the burner caps for cleaning lift the burner cap off the burner head. Clean heavy soils with an absorbent cloth. Rinse with a clean, damp cloth and immediately thoroughly dry including the bottom and inside of the cap. Do not use harsh abrasive cleaners. They can scratch the porcelain on the cap. Do not clean burner caps in dishwasher. When placing the burner caps, see Important note below. Orifice port Figure 1 - Regular burner head IMPORTANT When placing the burner caps on the cooktop, be sure the burner caps are seated firmly on top of burner heads. Improper flame size and uneven heating may result when any surface burners are turned ON and the burner caps are not seated correctly. Figure 2- Cooktop G5 burner head