Electrolux EI30IF40LS Complete Owner's Guide (English) - Page 35
Restoring control to factory default settings, Interior oven light
View all Electrolux EI30IF40LS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Setting Oven Controls 35 Restoring control to factory default settings Your appliance is set with a number of predetermined oven control settings. Over time you may make changes to the original factory settings. The following functions or features have user programmable options or adjustments that may have been changed from the default settings. • Clock 12-hour or 24-hour display mode • 12-Hour Energy Savings or continuous bake mode • Tone volume • Oven temperature display mode (F° or C°) • Any oven temperature adjustment made • Any saved "my favorite" IMPORTANT! Before restoring, be aware that any previous changes made to the oven control settings will be erased once the keypad is pressed. This includes any temperature offset made for the oven when baking. Interior oven light The interior oven light will automatically turn ON when the door is open. Press to turn the interior oven light ON and OFF whenever the oven door is closed. The oven light will not operate during a self clean cycle. The interior oven light is located at the upper left rear wall of the oven interior and is covered with a glass shield held in place with a wire holder. The glass shield must be in place whenever the oven is in use. To change the interior light, see Changing the oven light in the "Care and Cleaning" section. To restore factory default settings: 1. Press and hold the number 7 key for 6 sec- 7 onds. A beep will sound and rST P S will appear in the display (Figure 62). 2. Press START to accept START Fig. 62 Oven ready to reset to default settings