Electrolux EI30IF40LS Complete Owner's Guide (English) - Page 37

Setting Oven Controls 37 Setting fresh clean A self-cleaning oven automatically cleans itself using much higher temperatures than those used for cooking. The selfclean feature eliminates soils completely or reduces them to a fine powdered ash that, when the oven has cooled, can be wiped away easily with a damp cloth. The self-clean function provides 3 different clean time settings for self-cleaning. Set clean for 2 hours for light, 3 hours for normal or 4 hours for heavier soils. Once active, the door lock motor will begin locking the oven door. door loc (Figure 68) will appear in the display. DO NOT try to open the door when the door loc message is on (allow about 15 seconds for the oven door to completely lock). DO NOT force the oven door open. This could damage the door locking system. Once the oven door is locked the door loc message will turn off and CLn will appear in the display for the entire self clean cycle (Figure 69). To start a self-clean: 1. The oven door should be empty and all oven racks removed. Remove all items from the cooktop. Be sure the oven door is completely closed 2. Press fresh clean once for a 3-hour clean (Figure 65), twice for a 4-hour clean (Figure 66) or 3 times for a 2-hour clean fresh (Figure 67). clean 3. Press START START Fig. 68 Door lock indicator Fig. 69 Oven in self clean operation When the self clean cycle is finished: 1. The time of day and Hot will show in the display (Figure 70). 2. Once the oven has cooled (about 1 hour) and Hot is no lon- ger displayed, the door OPn message will appear (Figure 71). When this message turns OFF the door has finished unlocking. Fig. 65 3 Hour normal clean Fig. 66 4 Hour heavy clean Fig. 67 2 Hour light clean Fig. 70 Hot oven (door still locked) Fig. 71 Door opens when oven is cooled 3. When the oven is cool, wipe away any residue or powdered ash from the oven interior using a damp cloth or paper towel. A self-clean cycle will not start if the control lock feature is active. When the self clean feature is active, you may check the amount of time remaining by pressing . fresh clean If a self-clean cycle was started but did not finish due to a power outage, your oven may not have completely cleaned.