Electrolux EI30IF40LS Complete Owner's Guide (English) - Page 41
Cooktop cleaning, Aluminum foil and oven liners, Replacing the oven light
View all Electrolux EI30IF40LS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Care and Cleaning 41 Cooktop cleaning (cont'd) Plastic or foods with a high sugar content: These types of soils need be removed immediately. Permanent damage (such as pitting of the cooktop surface) may occur if not removed immediately. After turning the surface elements OFF, use a razor blade scraper or a metal spatula with a mitt and scrape the soil from the hot surface. Allow the cooktop to cool. Use the same method for heavy or burned on soils. Damage to the ceramic glass cooktop may occur if you use an abrasive type cleaning pad. Only use cleaning products that have been specifically designed for ceramic glass cooktops. Do not use the following on the cooktop: • Do not use abrasive cleaners and scouring pads, such as metal and some nylon pads. They may scratch the cooktop, making it more difficult to clean. • Do not use harsh cleaners, such as chlorine bleach, ammonia or oven cleaners, as they may etch or discolor the cooktop. • Do not use dirty sponges, cloths or paper towels, as they can leave soil or lint on the cooktop which can burn and cause discoloration. BLEACH Aluminum foil and oven liners Do not use oven bottom liners or use aluminum foil to cover the oven racks. Protective liners-Do not use aluminum foil to line the oven bottom, except as suggested in the manual. Improper installation of these liners may result in a risk of electrical shock, or fire. Using a liner in the oven restricts the heat and air flow needed to obtain the best possible cooking results for any oven. During self-clean the oven temperature can become hot enough to melt aluminum cooking utensils or aluminum foil if left in the oven. This could result in permanent damage to the oven interior and porcelain finish. Replacing the oven light Be sure the range is unplugged and all parts are COOL before replacing oven light. Wear a leather-faced glove for protection against possible broken glass. The interior oven light bulb is located at the rear oven cavity and is covered with a glass shield. The glass shield must be in place whenever the oven is in use (Figure 77). Replacing the oven interior light bulb: 1. Turn electrical power off at the main source or unplug the appliance. 2. Remove interior oven light shield (Figure 77). 3. Replace bulb with a new T-4 type 40 Watt Halogen appliance bulb. Please note: do not allow your fingers to touch the new bulb when replacing. This will shorten the life of the new bulb. Use a paper towel to cover the new bulb when installing. 4. Replace glass interior oven light shield. 5. Turn power back on again at the main source (or plug the appliance back in). 6. Be sure to reset the time of day on the clock. ABRASIVE CLEANERS AMMONIA Figure 76: Never use harsh or abrasive cleaners oven interior light bulb rear oven cavity glass shield Figure 77: Oven light and glass shield