Epson 5510 Owners Manual - Page 51
projector's R/R-Y, G/Y and B/B-Y jacks. Insert the, For component
View all Epson 5510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
4. Connect the other plugs on the audio/video cable to the Audio jacks of the projector: insert the white plug into the L jack and the red plug into the R jack. Connect the plug at the other end of the audio/video cable to the audio output jacks of the video source. 5. For S-Video, insert one end of an S-Video cable into the projector's S-Video connector. Insert the other end into the S-video-out jack of your video source. S-Video connector S-Video cable 6. For component, insert three ends of a BNC cable into the projector's R/R-Y, G/Y and B/B-Y jacks. Insert the opposite ends of the cable into the Y/Video, C/R-Y, and B-Y jacks on your component video source. (Don't insert any of the cable ends into the HD/Sync and VD jacks.) 7. Make sure the Computer 2/BNC switch is set to BNC. ♦ Note: When the Computer 2/BNC switch is set to BNC, the projector is unable to project the Computer 2 image signal. ♦ Note: Use a standard BNC cable, which you can purchase from any computer store. The 5BNC video cable supplied by EPSON as an optional accessory does not work with component video. s s s s s s Connecting to a Computer 31