Epson ActionNote 500C User Manual - Page 48
If the connector has retaining screws, tighten them by hand or, already attached.
![]() |
View all Epson ActionNote 500C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
2. Connect the monitor cable to the port labelled VIDEO on the back of the computer. 3. If the connector has retaining screws, tighten them by hand or with a screwdriver. 4. Connect the other end of the cable to them monitor, if it is not already attached. 5. Connect the monitor's power cable to a grounded electrical socket. Connecting Optional Devices 4 - 3
![](/manual_guide/products/epson-actionnote-500c-user-manual-95faea4/48.png)
2.
3.
4.
Connect the monitor cable to the port labelled VIDEO on the
back of the computer.
If the connector has retaining screws, tighten them by hand or
with a screwdriver.
Connect the other end of the cable to them monitor, if it is not
already attached.
5.
Connect the monitor's
power cable to a grounded electrical
socket.
Connecting Optional Devices
4-3