Epson ActionNote 500C User Manual - Page 89
Built-in Command Set, receive commands from you; in on-line state, your keystrokes are
![]() |
View all Epson ActionNote 500C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Built-in Command Set If you are not using a telecommunications program, you can use the fax/modem's built-in command set. These commands are compatible with the Hayes® Smartmodem®series of modems. Note When you use a telecommunications software program like BitCom or WinFax LITE, it provides its own set of commands that control the fax/modem. You will normally use the program's commands instead of the built-in set. You need the following information only if you are not using a telecommunications programs. Your fax/modem has two operating states: command state and on-line state. The fax/modem must be in command state to receive commands from you; in on-line state, your keystrokes are passed directly to the telephone line. The fax/modem enters the command state when you: Turn on your computer Select the Reset command (ATZn) Place a call but unable to make a connection Exit the on-line state using the escape sequence (+++). Fax/Modem B-3
![](/manual_guide/products/epson-actionnote-500c-user-manual-95faea4/89.png)