Epson ActionNote 500C User Manual - Page 91
AT Command Summary continued, Hz guard tone in CCITT mode
View all Epson ActionNote 500C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
AT Command Summary (continued) Command Description X4 Enables all result codes Y0 Disable long space disconnect Y1 Enable long space disconnect Z0 Software reset; recalls user configuration 0 Z1 Software reset; recalls user configuration 1 &C0 DCD signal always on &C1 DCD signal on when carrier present &D0 Ignore DTR signal &D1 Returns to command mode when an on-to-off DTR transition occurs &D2 Hangs up and returns to command mode when an on-to-off DTR transition occurs &D3 Resets when an on-to-off DTR transition occurs &F Loads factory configuration settings &G0 No guard tone in CCITT mode &G1 &G2 &P0 &P1 &V &W0 &W1 &Y0 &Y1 &Z n=x 550 Hz guard tone in CCITT mode 1800 Hz guard tone in CCITT mode Pulse dial make/break ratio = 39%/61%(U.S.) Pulse dial make/break ratio = 33%/67%(U.K.) Display configuration values and dialog settings Save storable parameters as user configuration 0 Save storable parameters as user configuration 1 Load user configuration 0 on power up Load user configuration 1 on power up Store phone number x in location n(n=0-3) Fax/Modem B-5