Epson C1440AXIS User Manual - Page 30
Configuring the Print Server Using AXIS NetPilot, NetWare, NetBIOS/NetBEUI, TCP/IP, SNMP, and Apple
![]() |
UPC - 667026001031
View all Epson C1440AXIS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Section 3: Installing and Configuring the Print Server Configuring the Print Server Using AXIS NetPilot The AXIS NetPilot Installation Wizard enables you to install and configure the AXIS 1440 for your network quickly and easily. You can use it to configure the print server for multiple network protocols: NetWare, NetBIOS/NetBEUI, TCP/IP, SNMP, and Apple EtherTalk. However, you must run it on a Windows workstation (or on an OS/2 workstation in a Win OS/2 window) connected to a NetWare or NetBIOS/NetBEUI network. Notes: t If you're installing and configuring the AXIS 1440 from a Windows NT workstation, your display should not be set to a generic video driver, such as VGA compatible. Before you start AXIS NetPilot, make sure your display is set to the exact video driver for your hardware. (Check your computer documentation if you're unsure of the correct video driver.) If you need to reset your display setting, restart your computer before beginning this procedure. t If you have a network that supports NetBIOS/NetBEUI, you don't need to use the AXIS NetPilot Installation Wizard to perform initial setup unless you want to change the default print server name. Skip this procedure and go to Section 5 Setting Up Windows Workstations. 1. Follow the instructions in Software Installation on page 18 to install the AXIS software on your computer. 2. Double-click the NetPilot icon, which is located in the folder where you installed AXIS NetPilot. 20 AXIS 1440 User's Manual
![](/manual_guide/products/epson-c1440axis-user-manual-639ec72/30.png)