Epson C1440AXIS User Manual - Page 41
PERFORMING ADDITIONAL NETWARE SETUP, Adding Print Queues to the AXIS 1440 Print Server
![]() |
UPC - 667026001031
View all Epson C1440AXIS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Section 4: Performing Additional NetWare Setup Section 4 Performing Additional NetWare Setup This chapter describes how to use AXIS NetPilot to add print queues to the AXIS 1440. For information on how to use AXIS NetPilot to perform other configuration tasks, see Using AXIS NetPilot on page 63. If you plan to use the AXIS 1440 in a multiprotocol environment, you need to set it up in each environment in your network. See the relevant sections in this manual: Section 5 Setting Up Windows Workstations on page 35 Section 6 Setting Up Macintosh Computers on page 47 Section 7 Setting Up OS/2 Workstations on page 49 Section 8 Setting Up - UNIX on page 53 Adding Print Queues to the AXIS 1440 Print Server You can use AXIS NetPilot to add print queues to your AXIS 1440 in both Print Server Mode and Remote Printer Mode. In Print Server Mode, which is recommended for medium to large networks, the AXIS 1440 emulates a workstation running PSERVER. In Remote Printer Mode, recommended for small networks where the number of NetWare user licenses may be limited, the AXIS 1440 emulates a workstation running RPRINTER or NPRINTER. See your NetWare documentation for more information about Printer Server Mode and Remote Printer Mode. Note: t You must have performed basic installation and configuration of the AXIS 1440 Print Server before you begin this procedure. See Configuring the Print Server Using AXIS NetPilot on page 20. AXIS 1440 User's Manual 31
![](/manual_guide/products/epson-c1440axis-user-manual-639ec72/41.png)