Epson C1440AXIS User Manual - Page 45
SETTING UP WINDOWS WORKSTATIONS, Setting Up Windows 95, Windows 98
![]() |
UPC - 667026001031
View all Epson C1440AXIS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Section 5: Setting Up Windows Workstations Section 5 Setting Up Windows Workstations This section describes how to use the AXIS print utilities for printing in the Windows environment. If you plan to use the AXIS 1440 in a multiprotocol environment, you need to set it up in each environment in your network. See the relevant sections in this manual: Section 4 Performing Additional NetWare Setup on page 31 Section 6 Setting Up Macintosh Computers on page 47 Section 7 Setting Up OS/2 Workstations on page 49 Section 8 Setting Up - UNIX on page 53 Setting Up Windows 95, Windows 98, and Windows NT Workstations If you have a network supporting the NetBIOS/NetBEUI or TCP/IP (LPR) protocols, use AXIS Print Monitor to configure AXIS 1440 printer ports on Windows 95, Windows 98 and Windows NT workstations for peer-to-peer or client-server printing. Install the utility on each workstation performing peer-to-peer printing, and on server workstations in a client-server environment. (See Software Installation on page 18 for instructions.) AXIS Print Monitor allows users to access any shared network printer as if it were connected directly to their workstations. It also allows users to enable pop-up messages notifying them of error conditions. You can use AXIS NetPilot or the internal web server to change the print server's default name or other default parameters. See Section 9 Management and Configuration on page 57. AXIS 1440 User's Manual 35
![](/manual_guide/products/epson-c1440axis-user-manual-639ec72/45.png)