Epson C1440AXIS User Manual - Page 50
Using the Microsoft LPD Monitor with Windows NT 4.0
![]() |
UPC - 667026001031
View all Epson C1440AXIS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Section 5: Setting Up Windows Workstations Using the Microsoft LPD Monitor with Windows NT 4.0 This section describes how to use the built-in Microsoft® LPD Monitor to set up a Windows NT 4.0 server for LPR printing over the TCP/IP protocol. Before You Begin Preparing for LPR/LPD printing Before you begin this procedure, configure the AXIS 1440 for TCP/IP, as described in Configuring the Print Server for TCP/IP on page 23. Follow these steps to prepare for LPR/LPD printing: 1. Open the Control Panel and click the Network icon to verify that TCP/IP printing appears in the list of installed components. If TCP/IP is already installed, skip to Installing a printer below. 2. Select Protocols and add TCP/IP Protocol. 3. Select Services and add Microsoft TCP/IP Printing. Installing a printer Follow these steps to install a printer for LPD printing: 1. Click Start, point to Settings, then click Printers. 2. Right-click your EPSON printer icon and select Properties. 3. Click the Ports tab, then select Add Port. 4. Select LPR Port and click New Port. 5. In Add LPR compatible printer, enter the name or Internet address of the AXIS 1440 as the print server to provide LPD. 6. Enter 'LPT1' as the name of the printer or print queue on that server. 7. Click the Sharing tab, then select Shared to share the printer over the network. 8. Enter the name you want to use for the shared printer. 9. Click the Security tab to select security settings on the printer. 10. Click OK to save your settings. 40 AXIS 1440 User's Manual
![](/manual_guide/products/epson-c1440axis-user-manual-639ec72/50.png)