Epson C1440AXIS User Manual - Page 55
Client-Server Printing:, Client Setup, Windows Clients, using LANtastic, In the Control Panel
UPC - 667026001031
View all Epson C1440AXIS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Section 5: Setting Up Windows Workstations Client-Server Printing: Client Setup Follow these steps to set up a Windows for Workgroups workstation as a client: 1. In the Control Panel, select Printers. 2. Select your EPSON printer from the list of Installed Printers, then click Connect... 3. Select Network... 4. In the Device Name list, select a local port to redirect to your network printer. 5. In the Show Shared Printers on list, select the server from Server Setup above. 6. In the Shared Printers list, select the printer you want to use and click OK. 7. Click OK again, then click Close. 8. Exit the Control Panel. Client setup is complete. The client workstation is ready to print through the AXIS 1440. Windows Clients using LANtastic Windows workstations on a LANtastic network can also use the AXIS 1440 Print Server for peer-to-peer printing. Follow the instructions for your workstation's operating system to set it up. Note: t Make sure that your LANtastic client is running the desired printing protocols. AXIS 1440 User's Manual 45