Epson C823781 Administrator's Manual - Page 204
Ports, Con Port, Get status every 20 sec, Get Printer Attributes, EpsonNet Internet
![]() |
UPC - 010343822221
View all Epson C823781 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 204 highlights
Enter Proxy Server Name: Enter the proxy server name or the IP address of the proxy server (up to 256 characters). Do not use the following characters Port Number: Enter the port number of the proxy server (from 0 to 65535). Get Printer Attributes: When you select this box and click OK, EpsonNet Internet Print communicates with the printer and acquires information, so it may take a few minutes before a message appears. This setting is available only when creating a port. Get status every 20 sec.: Select this box when you want to receive printer status updates at regular intervals (every 5 seconds during printing and every 20 seconds when idle). If you select this box, a message will appear if an error occurs during printing. You can also check the printer status by double-clicking the printer icon. OK button: Saves the settings. Cancel button: Cancels any changes. Note: ❏ The settings can be changed after setting up the printer. In the printer Properties dialog box, click the Ports tab, and click the Configure Port button to change the settings. ❏ Be aware that if you connect to the Internet using a dial-up router and select the Get status every 20 sec check box, you may be charged for the extra line connection. ❏ When you select the Get Printer Attributes check box and click OK, an error message may appear. Be sure that the printer power is on, and the printer is connected to the network. 192 EpsonNet Internet Print
![](/manual_guide/products/epson-c823781-administrators-manual-de3e49a/204.png)