Epson C823781 Administrator's Manual - Page 93

Search options-IP 4 To search for the print servers in other segments, set the specific network address and subnet mask. The settings you modified on 4 this screen do not affect the search parameters used for EpsonNet MacAssist EasySetup. Select Use the search option to search for a print server in 4 another segment. Do not select it if the print server you want to configure is located in the same segment. 4 Enter the network address and subnet mask (valid range 0 to 255). Ask your network administrator for the address. Then click Add. You can add up to 20 addresses. To remove the address from the list, select the address and click Delete. Select Refresh from the Device menu or restart EpsonNet 4 MacAssist for the settings to take effect. 4 4 4 4 4 Note: ❏ If you try to add an incorrect network address, the following message appears: "The network address XXX.XXX.XXX.XXX that you 4 entered will be added to the list as XXX.XXX.XXX.X. Add this address?" Check the correct network address and then click OK to add it. ❏ If you try to add the same network address, the message"This 4 network address has already been registered" appears, which indicates this address cannot be added. EpsonNet MacAssist Configuration Utility 81