Epson C823781 Administrator's Manual - Page 211
Set Using Automatic Private IP Addressing APIPA, Manual, Enable, Set Using, Set Using PING, Disable
UPC - 010343822221
View all Epson C823781 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 211 highlights
❏ When Auto is selected, DHCP becomes available. To use the DHCP server, make sure it is installed on your computer and correctly configured. See your operating system's online help for detailed instructions. ❏ If Set Using Automatic Private IP Addressing (APIPA) is enabled, a private IP address is automatically assigned to the print server even when there are no DHCP servers on your system or your network. 10 10 10 ❏ If the Dynamic DNS function is not supported, we recommend that you select Manual and then enter an IP address. If you select Auto, the IP address of the print server changes every time you turn on the printer, and you need to change the printer port setting accordingly. 5. To assign an IP address manually, enter the IP address, the subnet mask, and the default gateway. Be sure the IP address does not conflict with any other devices on the network. 10 10 10 Note: If there is a server or a router functioning as a gateway, enter the IP address of the server or the router for the gateway address. If there is no gateway, leave the default values there. 6. If you want to get a private address between 169.254.1.1 and 169.254.254.254 automatically when an IP address cannot be obtained by the DHCP server, leave it at Enable for Set Using Automatic Private IP Addressing (APIPA). 7. When setting an IP address using the ping command, select Enable for Set Using PING. Select Disable when setting an IP address with EpsonNet WinAssist/MacAssist/WebAssist; this prevents any unexpected change of the IP address. Note: Be sure to select Disable when not using ping; this prevents an unexpected change of the IP address by EpsonNet WebManager. 10 10 10 10 10 10 EpsonNet WebAssist 199