Epson C823781 Administrator's Manual - Page 87
About Password, MacAssist, and WebAssist.
UPC - 010343822221
View all Epson C823781 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
About Password 3 If you set a password, you must enter it to configure the print server. When you click OK in the setting dialog box or click the Return to Default button, the Password dialog box appears. 3 3 1. To set a password or to change the current password, click Change. The Administrator password dialog box appears. 2. When you set a password for the first time, leave the Old Password box blank, and enter a password in the New 3 Password box and in the New Password (again) box (up to 20 characters). Then click OK. Passwords are case sensitive. 3 Note: ❏ The same password is used for EpsonNet WinAssist, MacAssist, and WebAssist. 3 ❏ Since the new password becomes effective after the data is sent to the print server, enter the old password immediately after changing the password. 3 ❏ If you forget your password, you need to initialize the print server. See "Initializing the Print Server" on page 229 for 3 instructions. 3 3 3 3 EpsonNet WinAssist Configuration Utility 75