Epson C823781 Administrator's Manual - Page 44
Caution, and green Data light are on; otherwise, the print server will
UPC - 010343822221
View all Epson C823781 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Note: ❏ Use a Category 5 twisted-pair cable to connect the print server to the network. ❏ The print server will automatically use DHCP to obtain an IP address. If it cannot get an IP address this way, it will use the private IP address of 192.168.192.168. ❏ Do not connect the print server and the computer directly. Be sure to use a hub to connect the print server to the network. 4. Turn the printer on. 5. Plug the AC adapter's power cord into a grounded electrical outlet. Then connect it to the AC adapter. Be sure to use the AC adapter included with the print server. 6. Press and hold down the status sheet button on the print server, then plug the AC adapter into the DC-IN connector on the print server. Continue to hold down the status sheet button for about ten seconds. Note: It can take up to one minute to initialize the print server. When it's done initializing, its STATUS light turns green or orange. 7. When the print server is done initializing, press the status sheet button again for about two seconds to print the status sheets. If the sheets print, the print server is installed correctly. c Caution: ❏ Do not press the status sheet button while the red Status light and green Data light are on; otherwise, the print server will return to its factory default settings, and the network status sheet will not print correctly. ❏ Before disconnecting the print server from the printer, always turn off the printer and unplug the AC adapter. 32 How to Set Up the Print Server