Epson EMP-TW20 User Manual - Page 16

Turning the Power on and Projecting Images TTuurrnnininggthtehepopwoewr eornon Remove a lens cover. Use the accessory power cable to connect the projector to an electrical outlet. Turn the power on for the signal source (for a video source, press the [Play] button to start playback). Turn the power on for the projector. The "beep" start-up tone will sound. After a short period, the lamp will turn on and projection will start. The projector is equipped with a "Child Lock" function that prevents young TIP children from accidentally turning the power on and looking into the lens. p.29 When using above an altitude of about 1500 m, set the "High Altitude Mode" to "ON". p.29 1 Beep 4 Control Panel Remote Control 14 2 3 * For video equipment, press "play" to start playback. This projector is equipped with an automatic adjustment Example of output selection function that automatically optimizes it when the RGB video NEC Panasonic TIP source or a computer input signal is switched. SOTEC If a laptop computer or a computer with a LCD screen has been connected to the projector, you may need to use keyboard or function settings to change the output destination. While holding down the key, press (the key with a symbol such as HP Toshiba IBM SONY DELL / on it). After the selection is made, projection will soon Fujitsu start. Computer documentation Macintosh Set mirror setting or display detection.