Epson EMP-TW20 User Manual - Page 28
Image menu
![]() |
View all Epson EMP-TW20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Configuration Menu Functions "Image" menu Picture Quality Only displayed for component video/composite video/S-Video input Only displayed for RGB-video/Computer input Brightness *1 The brightness of the images can be adjusted. If projecting in dark rooms or onto small screens and the images appear too bright, decrease the setting. Contrast *1 Adjusts the difference between bright and dark areas. When the contrast is increased, images with greater modulation are obtained. Color Saturation *1 This adjusts the colour intensity for the images. Tint *1 (Adjustment is only possible when composite video and S-Video signals in NTSC format are being input.) This adjusts the image tint. Tracking *1 This adjusts the images if vertical stripes appear in the images. Sync. *1 This adjusts the images if flickering, fuzziness or interference appear in the images. • Flickering and fuzziness may also appear in images when the brightness, contrast, sharpness and key- stone correction settings are adjusted. • Clearer adjustments can be obtained if you adjust the "Tracking" first and then adjust the "Sync". Color Temp. *2 The colour temperature can be selected from three settings in order to adjust the overall tint of the images. p.20 Skin Tone *2 This adjusts the skin tones of people who appear in the images. p.20 Sharpness *1 This adjusts the image sharpness. Color Mode *1 The Color Mode can be selected from six different settings in accordance with the images being projected. p.18 *1 The setting values are stored separately for each image source and signal type. *2 The setting values are stored separately for each image source and colour mode setting. 26
![](/manual_guide/products/epson-emptw20-user-manual-14761f8/28.png)