Epson LX-300II Product Information Guide - Page 16

Epson LX-300+II 5. If the outer case or paper guide is still dirty, clean it with a soft, clean cloth dampened with mild detergent dissolved in water. Keep the printer cover in place and flat on top of the printer to prevent water from getting inside the printer. Never use alcohols or thinners to clean the printer; these chemicals can damage the printer components as well as the case. Be careful not to get water on the printer mechanism or electronic components. Do not use a hard or abrasive brush. Do not spray lubricants inside the printer; unsuitable lubricants can damage the printer mechanism. Related Documentation( Manual Epson LX-300+II User's Guide CD-ROM containing the on-screen Reference Guide Part number 4105348-00/CPD-21412 3101470-00/CPD-21416 Transporting the Printer If you need to transport your printer for some distance, carefully repack it using the original box and packing materials or equivalent packaging. When transporting the printer, do not lift it by the USB cable holder as the holder may detach and cause the printer to fall. Hold the bottom left and right sides of the printer firmly to lift it. You need to move the print head by hand to remove the ribbon cartridge. If you have just used the printer, the print head may be hot; let it cool for a few minutes before touching it. 1. Remove any paper loaded in the printer. Make sure the printer is turned off. 2. Unplug the power cord from the electrical outlet; then disconnect the interface cable from the printer. 3. Remove the paper guide, the USB cable holder, paper supports, and knob. 4. Make sure the tractor that comes with your printer is installed in the push position. 5. If an additional pull tractor is installed, remove it. If any options are installed, remove them and pack them in their original boxes. 6. Make sure the print head is not hot. Then remove the ribbon cartridge. 7. Repack the printer, ribbon cartridge, and paper guide in the original packing materials and place them in the printer's original box. 16 - Epson LX-300+II 7/06