Epson LX-300II Product Information Guide - Page 3

Epson LX-300+II Electrical Input voltage range Rated frequency range Input frequency range Rated current Power consumption 120 V 220 to 240 V 99 to 132 V 198 to 264 V 50 to 60 Hz 49.5 to 60.5 Hz 0.6 A (maximum 1.4 A depending on the character type) 0.3 A (maximum 0.7 A depending on the character type) Approx. 23 W (ISO/IEC 10561 letter pattern) Energy Star Compliant Environmental Operation Storage Temperature (without condensation) 41 to 95 °F (5 to 35 °C) -22 to 140 °F (-30 to 60 °C) Humidity (without condensation) 10 to 80% RH 0 to 85% RH Safety Approvals Safety standards EMI 120 Volt UL 60950 CSA 60950 FCC part 15 subpart B class B CAN/CSA CEI/IEC CISPR22, class B 230 Volt EN 60950 AS/NZS CISPR22, class B CE Marking (230 V model) Low Voltage Directive 73/23/EEC EMC Directive 89/336/EEC EN 60950 EN 55022 Class B EN 61000-3-2 EN 61000-3-3 EN 55024 Paper Use recycled paper, envelopes, and single-sheet multipart forms only under normal temperature and humidity conditions, as follows: Temperature: 59 to 77 °F (15 to 25 °C) Humidity: 30 to 60% RH Do not load paper that has been folded or is damaged, wrinkled, or curled. Ordinary single sheets: paper guide and cut-sheet feeder entry Width Paper guide 3.9 to 10.1 inches (100 to 257 mm) Cut-sheet feeder 7.2 to 8.5 inches (182 to 216 mm) Length Paper guide 3.9 to 14.3 inches (100 to 364 mm) Cut-sheet feeder 10.1 to 14 inches (257 to 356 mm) Thickness Paper guide: 0.0025 to 0.0055 inch (0.065 to 0.14 mm) Cut sheet feeder: 0.0028 to 0.0055 inch (0.07 to 0.14 mm) Weight Paper guide: 14 to 24 lb (52 to 90 g/m2) Cut sheet feeder: 18 to 24 lb (64 to 90 g/m2) Single-sheet multipart forms: paper guide entry Width 3.9 to 10.1 inches (100 to 257 mm) Length 3.9 to 14.3 inches (100 to 364 mm) Copies 1 original + up to 4 copies Thickness 0.0047 to 0.015 inch (0.12 to 0.39 mm) Weight 12 to 15 lb (40 to 58 g/m2) Binding Line-glued at the top or one side of form Envelopes: paper guide entry Size No. 6: 6.5 × 3.6 inches (165 × 92 mm) No. 10: 9.5 × 4.1 inches (241 × 105 mm) Thickness 0.0063 to 0.0205 inch (0.16 to 0.52 mm) Weight 12 to 24 lb (45 to 90 g/m2) Continuous paper (standard and multipart): rear and bottom entry Width 4 to 10 inches (101.6 to 254 mm) Length 4 to 22 inches (101.6 to 558.8 mm) Copies 1 original + up to 4 copies Thickness Printable area 0.0025 to 0.015 inch (0.065 to 0.39 mm) Perforated edges (gathering area) up to 0.035 inch (0.9 mm) 7/06 Epson LX-300+II - 3