Epson LX-300II Product Information Guide - Page 4
Paper Alignment, Printable Area
View all Epson LX-300II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Epson LX-300+II Weight (not multipart) 14 to 22 lb (52 to 82 g/m2) Weight (1 multipart sheet) 12 to 15 lb (40 to 58 g/m2) Binding Spot-glued or crimp-bound on both sides Continuous paper with labels: bottom entry only Label size 0.94 × 2.5 inches (23.8 × 63.5 mm) minimum; 0.1 inch (2.5 mm) corner radius Backing sheet Width 4 to 10 inches (101.6 to 254 mm) Length 4 to 22 inches (101.6 to 558.8 mm) Thickness 0.0028 to 0.0035 inch (0.07 to 0.09 mm) Total thickness 0.0063 to 0.0075 inch (0.16 to 0.19 mm) Label weight 17 lb (64 g/m2) Roll paper: rear entry with optional roll paper holder only Width 8.5 inches (216 mm) Thickness 0.0028 to 0.0035 inch (0.07 to 0.09 mm) Weight 14 to 22 lb (52 to 82 g/m2) Paper Alignment Printing starts at "0" on the scale. The unprintable area is to the left of the "0". Printable Area Single sheets and envelopes A B A Printable area Printable B area B C C A The minimum top margin is 0.17 inch (4.2 mm). B The minimum left and right margins are 0.12 inch (3 mm). The maximum paper width is 10.1 inches (257 mm). The maximum printable width is 8 inches (203.2 mm). If the paper size is substantially wider than this, the side margins will be wider than the minimum, but the printable width does not increase beyond 8.0 inches (203.2 mm). C The minimum bottom margin is 0.17 inch (4.2 mm). Continuous paper A A Printable area B B A The minimum top and bottom margins above and below the perforation are 0.17 inch (4.2 mm). B The minimum left and right margins are 0.51 inch (13 mm). The maximum paper width is 10 inches (254 mm). The maximum printable width is 8 inches (203.2 mm). If the paper size is substantially wider than this, the side margins will be wider than the minimum, but the printable width does not increase beyond 8.0 inches (203.2 mm). 4 - Epson LX-300+II 7/06