Epson P-2000 Basics - Page 57
Using a Memory Card, Using the LCD, Do not remove a memory card or turn off the product while
![]() |
UPC - 010343852112
View all Epson P-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
◗ Avoid using outlets on the same circuit as photocopiers or air control systems that regularly switch on and off. ◗ Position this product's power cord so that it will not be stepped on or run over. ◗ Do not place any objects on the power cord and the AC adapter. ◗ Keep the power cord straight at the ends and at the points where it enters the transformer. ◗ The power cord should be placed to avoid abrasions, cuts, fraying, crimping, kinking, and other damage. ◗ If you cannot insert the plug into the power outlet, contact an electrician. ◗ Remove the AC plug from the outlet during lightning storms. ◗ For US and Canadian users: Use the included power cord or a 6 to 10 foot UL-approved type SPT-2 or heavier type, 2 x 18 AWG cord with a 125 V 10 A plug and 125 V 7 A connector. Using a Memory Card ◗ Only memory cards designed for the product's specifications can be used. (See page 17.) ◗ The methods for using memory cards vary according to card type. See the documentation included with your memory card for details. ◗ Do not remove a memory card or turn off the product while the Access light is flashing. Using the LCD ◗ The LCD panel on this product may contain a few small bright or dark spots. These are normal and do not mean that your LCD panel is damaged in any way. ◗ If the LCD panel on this product is damaged, contact Epson. ◗ If the liquid crystal solution contained in the LCD panel on this product leaks out and gets onto your hands, wash them thoroughly with soap and water. If it gets into your eyes, flush 57
![](/manual_guide/products/epson-p2000-basics-5ad9ecc/57.png)