Epson P3000 User Manual - Page 28
Connecting to a Video Source, Note: The projector is not compatible with a cable TV-style F connector
![]() |
UPC - 010343860476
View all Epson P3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Connecting to a Video Source The projector can receive composite video or S-Video. You have composite video if your video source has a one-pm RCA video jack. You have S-Video if your video source has a four-pin video jack. Note: The projector is not compatible with a cable TV-style F connector You can connect to both an S-Video and a composite video source at the same time. However, the projector automatically selects the S-Video source. To display composite video, you need to disconnect the S-Video source. The projector supports NTSC, PAL, and SECAM video formats. By default, it automatically detects and identifies the video format. However, you can specify that a single broadcast format be detected. (See "Video menu" in Chapter 3.) Note that the projector will then be able to detect only one type of video signal. The type of cable you use to connect the video source to the projector depends on whether you have composite video or S-Video. For composite video, use the video/audio cable supplied with the projector. For S-Video, use the S-Video cable supplied with your video device or obtain one from your computer dealer. To connect a video source to the projector: 1. Turn off the projector and video source if they are on. 2. Locate the video-out jack on the video source. It may be labeled Video Out, To Monitor, or something similar. Connecting to a Video Source 11
![](/manual_guide/products/epson-p3000-user-manual-95d892d/28.png)