Epson P3000 User Manual - Page 65
Note: In Windows, the ELP Remote Programmer assumes use of the COM1, serial port. To use COM2 port
![]() |
UPC - 010343860476
View all Epson P3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
On the Macintosh, you can assign key combinations, such as Command + 0, while in record mode. To do so, use the Link symbol under Mouse/Special Buttons between each key you want to combine. For example, to program Command + 0, choose Command in Mouse/Special Buttons, then choose Link in Mouse/Special Buttons, then type 0 in the text box. (It is not necessary to be in record mode to choose keys from Mouse/Special Buttons.) On the PC, use manual mode to create key combinations. See the next section. 5. Repeat steps 3 through 4 for each button you want to program. 6. Turn off record mode. Choose the Key Record button or, if you have a PC, press the Scroll Lock key 7. Activate the template by pressing the Activate button. This makes the new button assignment active with the remote control. To be able to use the remote control and the new macros, be sure you have connected the RS-232C cable as described in Chapter 1. 8. Save the template. Choose Save or Save As in the File menu. Note: In Windows, the ELP Remote Programmer assumes use of the COM1 serial port. To use COM2 port, choose COM2 in the Special menu 50 4 l Remote Control of the Computer
![](/manual_guide/products/epson-p3000-user-manual-95d892d/65.png)