Epson PP-50BD Users Guide for Mac - Page 57

Publishing Discs Selecting Publish Mode Setting the most suitable publish mode for the usage or number of discs to be published enables efficient disc publishing. Select the publish mode, referring to the following descriptions, and change the setting in the properties setting if necessary. For properties setting procedure, see "Properties Setting" on page 28. If you publish with EPSON Total Disc Maker, you can change the publish mode setting in Notes Publish view. The PP-100II, PP-100, and PP-100AP have three publish modes, Standard mode, External Output mode, and Batch mode. The PP-50 has two publish modes, Low-volume mode and Standard mode. For PP-100II/PP-100/PP-100AP Standard mode: When you want to publish up to 50 identical discs at once This mode uses Stacker 1 as the input stacker for discs. You can select Stacker 2 or Stacker 4 as the output stacker. If you select Stacker 2 as the output stacker, you can publish up to 50 discs without having to replenish the discs or take out published discs. If you select Stacker 4 as the output stacker, you can easily take out published discs without even having to pause a job during publishing up to 50 discs. Repeatedly replenishing and taking out discs allows for the continuous publishing of up to 1,000 discs. • When you select Stacker 2 as the output stacker 1 1 2 2 • When you select stacker 4 as the output stacker 1 1 4 4 57