Epson PP-50BD Users Guide for Mac - Page 72
For PP-50, Publish Mode, Output Stacker, Number of Discs
View all Epson PP-50BD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
For PP-50 The stacker used as the output stacker differs depending on the publish mode. Confirm the output stacker in the following table. Publish Mode Output Stacker Number of Discs Standard mode (when the output stacker is set to Stacker 2) Standard mode (when the output stacker is set to Stacker 3) Low-volume mode Stacker 2 Stacker 3 Stacker 3 Up to approximately 50 discs Up to approximately 20 discs Up to approximately 20 discs 1 Open the disc cover. For precautions when you open the disc cover, see "Opening the Disc Cover" on page 21. 2 Only when the output stacker is Stacker 2, take it out. 3 Take out the published discs from the output stacker. • After printing on the label surface, allow EPSON specified CDs/DVDs to dry for at least one hour, and other types of discs for at least 24 hours. Do not insert discs into a drive or other device until they are completely dry. • Avoid drying under direct sunlight. • Directly touching or moisture getting on the label surface before or after printing may result in blurring or discs sticking together. 72