Epson PP-50BD Users Guide for Mac - Page 70
Print, Con each setting., Click
View all Epson PP-50BD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
7 Configure each setting. See "Print Settings area" on page 46 for details. 8 Click Print. EPSON Total Disc Utility starts, and the disc publishing process begins. • With the PP-100II, PP-100, or PP-100AP, you can take out the published discs output to Stacker 4 without pausing the job. However, when the BUSY light is flashing rapidly, do not pull out Stacker 4 because discs are being output to Stacker 4. Doing so may damage the discs. • Once the output stacker becomes full, the job is paused. The job is resumed automatically if you take out the published discs and close the disc cover/stacker 4. • If the Mac shuts down while processing a job, all the jobs are cancelled. • For PP-100II/PP-100 ∗ Do not open the disc cover while a job is being processed (while the BUSY light is flashing). This could adversely affect the writing or printing quality. ∗ If a job is being processed (while the BUSY light is flashing) and you need to open the disc cover to load or take out discs, first pause the job and then open the disc cover. See "Pausing/Cancelling Jobs" on page 73 for the procedure to pause a job. ∗ If you open the disc cover while a job is being processed (while the BUSY light is flashing), an alarm beep sounds and the current job enters the standby status. Closing the disc cover automatically resumes the job. ∗ While an alarm beep is sounding, the arm is moving. To ensure safety, do not put your hands inside the product. Also, do not operate any stackers while an alarm beep is sounding. This could damage the arm. • For PP-100AP ∗ If you open the disc cover while a job is being processed (while the BUSY light is flashing), make sure the internal light has turned off and that the arm has stopped moving before performing any operation, such as loading or taking out discs. Do not put your hands inside the product or operate any stackers while the arm is moving. Also, open and close the disc cover gently. ∗ If you open the disc cover while a job is being processed (while the BUSY light is flashing), the current job enters the standby status. Closing the disc cover automatically resumes the job. • For PP-50 ∗ If you open the disc cover while a job is being processed (while the BUSY light is flashing), make sure the internal light has turned off and that the arm has stopped moving before performing any operation, such as loading or taking out discs. Do not put your hands inside the product or operate any stackers while the arm is moving. Also, open and close the disc cover gently. ∗ If you open the disc cover while a job is being processed (while the BUSY light is flashing), the current job enters the standby status. Closing the disc cover automatically resumes the job. 70