Epson PictureMate Charm - PM 225 Basics - Page 41
Aligning the Print Head, Maintenance, Head Alignment, Print
View all Epson PictureMate Charm - PM 225 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
● If the pattern is OK, select Yes and press OK to finish. ● If the pattern has gaps or missing lines, select No and press OK to clean the print head again. You may need to clean it two times before the nozzles are clean. If you don't see any improvement after cleaning two times, see "Print Quality Problems" on page 43. You can also turn off PictureMate and wait for at least 6 hours to let any dried ink to soften. Then try cleaning the print head again. Note: You can run a nozzle check before you clean the print head. Follow steps 1 through 3 on page 37. Then select Nozzle Check. Aligning the Print Head If you have moved PictureMate and print quality is not as good as it used to be-if your prints look fuzzy or have light or dark lines running through them-you may need to align the print head. 1 Load paper in PictureMate so you can print the head alignment pattern. 2 Press Menu. 3 Press l or r to highlight Maintenance, then press OK. 4 Press l or r to select Head Alignment, then press OK. You see a confirmation screen: 5 Press Print. The alignment pattern is printed: Best pattern Misaligned pattern 39