Epson PowerLite 1930 User Manual - Page 70
Enter, AMX Device Discovery, Crestron RoomView, Bonjour, Message, Broadcasting, Complete
View all Epson PowerLite 1930 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
5. Select the SNMP menu and press Enter (PowerLite 1945W/1955/1965). 6. Enter up to two IP addresses to receive SNMP notifications, using 0 to 255 for each address field. Note: Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where x is a number from 0 to 255). 7. If your network environment uses an AMX controller, turn on the AMX Device Discovery setting to allow the projector to be detected (PowerLite 1930/1940W/1950/1960). 8. If your network environment uses a Crestron RoomView controller, turn on the Crestron RoomView setting to allow the projector to be detected (PowerLite 1930/1940W/1950/1960). 9. If you are connecting to a network using Bonjour, turn on the Bonjour setting (PowerLite 1930/1940W/1950/1960). 10. If you want this projector to receive broadcasted messages over the network, turn on the Message Broadcasting setting. Administrators can broadcast messages over the network using the Message Broadcasting plug-in for EasyMP Monitor (PowerLite 1940W/1950/1960) (Windows only). 11. When you finish selecting settings, select Complete or Setup complete and follow the on-screen instructions to save your settings and exit the menus. Parent topic: Using the Projector on a Network 70