Epson PowerLite Cinema 500 User Manual - Page 19

Inverting and Mirroring the Image, Selecting the Input Signal Setting, Setting, Screen, Projection

Get Epson PowerLite Cinema 500 PDF manuals and user guides View all Epson PowerLite Cinema 500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

Inverting and Mirroring the Image If the image is displayed upside-down or backward, select the correct Projection option: 1. Press the Menu button on the remote control. 2. Use the menu navigation buttons to open the Setting menu, then open the Screen menu, and then select Projection. 3. Choose from these options: Menu button ■ Front if the projector is located in front of the screen (for example, on a table). ■ Front/Ceiling if the projector is located in front of the screen and mounted overhead. Menu navigation buttons ■ Rear if the projector is located behind the screen. ■ Rear/Ceiling if the projector is located behind the screen and mounted overhead. Selecting the Input Signal Setting If you're using the projector's Input A or Input B port, select the correct setting for the type of equipment you've connected to it: 1. Press the Menu button on the remote control. 2. Use the menu navigation buttons to open the Setting menu, then open the Input Signal menu, and then select Input A or Input B (depending on the port to which you've connected the equipment). 3. Choose from these options: ■ YCbCr if your video player outputs an NTSC signal. ■ YPbPr if your video player outputs an HDTV signal. ■ RGB-Video if your video player outputs an RGB video signal. ■ RGB if the image is coming from a computer. Note: If you're unsure which setting to use, check the label next to the port on your video equipment. Displaying and Adjusting the Image 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
Displaying and Adjusting the Image
19
Inverting and Mirroring the Image
If the image is displayed upside-down or backward, select the correct Projection option:
1.
Press the
Menu
button on the remote control.
2.
Use the menu navigation buttons to open the
Setting
menu, then open the
Screen
menu, and then select
Projection
.
3.
Choose from these options:
■
Front
if the projector is located in front of the
screen (for example, on a table).
■
Front/Ceiling
if the projector is located in front
of the screen and mounted overhead.
■
Rear
if the projector is located behind the screen.
■
Rear/Ceiling
if the projector is located behind
the screen and mounted overhead.
Selecting the Input Signal Setting
If you’re using the projector’s Input A or Input B port, select the correct setting for the type of
equipment you’ve connected to it:
1.
Press the
Menu
button on the remote control.
2.
Use the menu navigation buttons to open the
Setting
menu, then open the
Input Signal
menu, and then select
Input A
or
Input B
(depending on the port to which you’ve
connected the equipment).
3.
Choose from these options:
■
YCbCr
if your video player outputs an NTSC signal.
■
YPbPr
if your video player outputs an HDTV signal.
■
RGB-Video
if your video player outputs an RGB video signal.
■
RGB
if the image is coming from a computer.
Note:
If you’re unsure which setting to use, check the label next to the port on your video
equipment.
Menu
button
Menu
navigation
buttons