Epson PowerLite Cinema 500 User Manual - Page 20

Positioning the Image, Performing Keystone Correction, button on the remote control.

Get Epson PowerLite Cinema 500 PDF manuals and user guides View all Epson PowerLite Cinema 500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

Positioning the Image If the image is not centered on the screen, use the horizontal and vertical lens shift knobs to adjust its position. Note: You can display a test pattern to facilitate adjustment. Press the Pattern button on the remote control, then select Cross-hatching. Vertical lens shift knob Horizontal lens shift knob Adjustable feet If you still need to raise the height of the image after using the vertical lens shift knob, lift the front of the projector and rotate the adjustable feet until the image is positioned correctly. You can also use the feet to correct the angle of the image if it's tilted. Performing Keystone Correction If the projected image looks like or , use the Keystone function to correct its shape. Note: If the image is shaped like or , the projector has been placed off to the side of the screen and angled toward it. Face the projector straight ahead (instead of at the center of the screen), then use the horizontal lens shift knob to center the image. To perform keystone correction, press the arrow buttons on the projector, or access the menu system as follows: 1. Press the Menu button on the remote control. 2. Use the menu navigation buttons to open the Setting menu, then open the Screen menu, and then select Keystone. Menu button 3. Use the image. arrow buttons to adjust the shape of the 4. Press the Menu button when done. Menu navigation buttons 20 Displaying and Adjusting the Image

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
20
Displaying and Adjusting the Image
Positioning the Image
If the image is not centered on the screen, use the horizontal and vertical lens shift knobs to
adjust its position.
Note:
You can display a test pattern to facilitate adjustment. Press the
Pattern
button on the
remote control, then select
Cross-hatching
.
If you still need to raise the height of the image after using the vertical lens shift knob, lift the
front of the projector and rotate the adjustable feet until the image is positioned correctly.
You can also use the feet to correct the angle of the image if it’s tilted.
Performing Keystone Correction
If the projected image looks like
or
, use the Keystone function to correct its shape.
Note:
If the image is shaped like
or
, the projector has been placed off to the side of the
screen and angled toward it. Face the projector straight ahead (instead of at the center of the
screen), then use the horizontal lens shift knob to center the image.
To perform keystone correction, press the
arrow buttons
on the projector, or access the menu system as follows:
1.
Press the
Menu
button on the remote control.
2.
Use the menu navigation buttons to open the
Setting
menu, then open the
Screen
menu, and then select
Keystone
.
3.
Use the
arrow buttons to adjust the shape of the
image.
4.
Press the
Menu
button when done.
Adjustable feet
Vertical lens shift knob
Horizontal lens shift knob
Menu
button
Menu
navigation
buttons