Epson PowerLite Cinema 500 User Manual - Page 32

Color Settings If the image colors don't look correct, you can adjust them using these settings. Use the first three settings described below to make the most visible changes. If you only need to make slight adjustments, you can fine-tune the picture with the remaining settings. Note: You can also make color adjustments by attaching a PC or laptop to the projector and using the Cinema Color Editor software. See page 41. ■ Color Intensity Image ! Picture Quality ! Color Intensity Adjusts the color saturation of the image (not available for computer images). ■ Tint Image ! Picture Quality ! Tint Shifts the color balance between magenta and green (not available for computer images). ■ Abs. Color Temp. Image ! Color Adjustment ! Abs. Color Temp. ! Abs. Color Temp. Shifts the color balance between red and blue, making the image appear warmer or cooler. Note: You can display a test pattern to facilitate adjustment. Press the Pattern button on the remote control, then select Gray scale. Then press the button on the remote control to open an on-screen "line menu" and access the Abs. Color Temp. setting. ■ Flesh Tone Image ! Color Adjustment ! Abs. Color Temp. ! Flesh Tone Makes fine adjustments to the tint. Controls the amount of magenta or green in the image. Also useful for correcting black-and-white images, if they look tinted. Note: You can also access the Flesh Tone setting by pressing the control to open an on-screen "line menu." ■ RGB Image ! Color Adjustment ! RGB/RGBCMY ! RGB button on the remote Note: If you cannot access the RGB settings, highlight RGB/RGBCMY (the first item in the menu list) and press the button, then choose RGB in the sub-menu. Use the RGB settings to fine-tune the color of the image. You can adjust the offset, gamma, and gain for each signal color (red, green, and blue). Use Offset to adjust darker shades, Gamma for intermediate shades, and Gain for the lightest shades. 32 Adjusting the Image Quality