Epson Stylus Pro 7900 Proofing Edition Printer Guide - Page 175
Moving the Printer on the Stand, position on the far right. If not, turn the printer back
View all Epson Stylus Pro 7900 Proofing Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
Maintaining and Transporting the Printer | 175 WARNING: The printer is very heavy. Make sure you have four people lift it. 7. Lift the printer using the hand grips where provided. (See the stickers located near the rear hand grips for the correct holding position.) Caution: Do not roll the printer on angled or uneven surfaces. 8. Keep the printer level while moving it. See page 176 for information about setting up the printer after transporting it. To ship the printer a longer distance, you should repack it using the original box and packing materials. If you don't have the original packaging, you can purchase replacement packaging from Epson. See page 12 for more information. Moving the Printer on the Stand When you need to move the printer a short distance, such as within the same building, you can roll the printer on its casters. 1. Make sure the printer is turned off and the carriage is in the home position (on the far right). If not, turn the printer back on, wait until the carriage moves to the home position, then turn off the printer. 2. Disconnect the power cord and interface cable. 3. Remove any paper and close the roll paper cover. Make sure the front cover is closed. 4. Store the paper basket as described on page 82. 175