Epson SureColor S30675 User Manual - Page 19

4 Epson LiftAssist lever If the media to be mounted on the roll holders seems heavy, use these levers to raise the media effortlessly to the level of the roll holders. There are two LiftAssist levers: one on the left and one on the right. 5 Pre-heater Heats the media before printing so that the print area is not subject to sudden changes in temperature. 6 Roll support Rest media on these supports before placing it on the roll holders. There are two supports: one on the left and one on the right. 7 Handle After placing media on the right roll holder, rotate the handle to press the holder and apply pressure to the roll core. LAN Port 1 RJ-45 connector Connects the LAN cable. Use a shielded twisted pair cable (category 5 or higher). 2 Data lamp The data lamp shows connection status and indicates whether the printer is receiving data. 3 Status lamp (green/red) The status lamp indicates network connection speed. Data lamp On Flashing Status lamp (green/red) On (green) Status The printer is connected using a 1000base-T connection. The printer is receiving data over a 1000base-T connection. Introduction 19