Epson SureColor S30675 User Manual - Page 240
Following are examples of the RIP print setting mode. Display of setting mode will
View all Epson SureColor S30675 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 240 highlights
Resolution (dpi) 720×1440 Number of passes 12 M/W level 3 4 Result Stripe banding less likely Tint unevenness less likely Recommendation ✓ S50675 Resolution (dpi) Banner 720×720 Number of passes 4 M/W level 1 2 3 4 Vinyl 720×1440 6 0 1 All media (Including Banner/Vinyl) 720×1440 8 2 3 Result Recommendation Stripe banding less likely Tint unevenness less likely, but stripe banding more likely Stripe banding less likely ✓ Tint unevenness less likely, but stripe banding more likely Stripe banding less likely ✓ Tint unevenness less likely, but stripe banding more likely Stripe banding less likely Tint unevenness less likely ✓ If banding cannot be cleared using the settings described above, select the HQ1 mode in RIP print settings. Stripe banding and tint unevenness will less likely to occur. If the banding cannot be cleared completely with HQ1 mode, then select HQ2 mode in RIP print settings. However, graininess might be more obvious than printing with HQ1 mode. The print speed of HQ1/HQ2 mode becomes lower than other print modes that use the same number of passes. Following are examples of the RIP print setting mode. Display of setting mode will be different depending on the software RIP. ❏ 720x720 4pass (HQ1) / 720x720 4pass (HQ2) ❏ 720x1440 6pass (HQ1) / 720x1440 6pass (HQ2) ❏ 720x1440 8pass (HQ1) / 720x1440 8pass (HQ2) Appendix 240