Epson SureColor S30675 User Manual - Page 235

Other Items Product Cleaning cartridge Maintenance Kit Ink Cleaner Waste Ink Bottle Cleaning Wiper Cleaning Sticks Clean Room Wipe1 Media Holding Plate Additional print Drying System Heavy Roll Media System Part number T699000 T724100 T699300 T724000 S090012 S090013 S090016 C12C890891 C12890751 C12C890761 Explanation Use to change the color mode to 8 Color (Unfixed) or 9 Color for print head washing, pre-storage maintenance, or changing color mode. Contains the cleaning sticks, gloves, wiper, wiper cleaner, flushing pad, and cleaning wiper required for printer maintenance. See "Cleaning Frequency" on page 129. Use for ink stains that can not otherwise be removed during normal maintenance. See "Cleaning Frequency" on page 129. Identical to the waste ink bottle supplied with the printer. Identical to the maintenance kit items supplied with the printer. Identical to the media holding plate supplied with the printer. Sold on a 1-plate basis. When replacing a removable media holding plate, replace both the right and left plates together. SEE REPLACING MEDIA HOLDING Uses a fan to blow air over the media and assist drying (included with the S50675). See HEATING & DRYING. A media feeding unit and auto take-up reel for heavy rolls (up to 80 kg or 176.4 lb). 1 Not available for purchase in some countries and regions. If the clean room wipe is not available from Epson, BEMCOT M-311 from Asahi Kasei Corporation is recommended. 2 Not available for purchase in some countries and regions. Supported Media The following media can be used with the printer. Print quality is greatly affected by the type and quality of media used. Choose a media suited to the task at hand. For information on use, refer to the documentation supplied with the media or contact the manufacturer. We recommend that you print a test run and check the results before purchasing media in large quantities. Important: Do not use media that is wrinkled, scuffed, torn, or dirty. Appendix 235