Epson SureColor S30675 User Manual - Page 34

Notes on handling media ❏ Do not fold the media or damage the printable surface. ❏ Do not touch the printable surface. Moisture and oils from your hands can affect print quality. ❏ When handling media, hold it by both edges. We recommend wearing cotton gloves. ❏ Keep the media dry. ❏ Packaging materials can be used to store media and should not be thrown away. ❏ Avoid locations that are subject to direct sunlight, excessive heat, or humidity. ❏ When not in use, media should be removed from the printer, rewound, and inserted in its original packaging for storage. Leaving media in the printer for extended periods may cause it to deteriorate. Handling media after printing To maintain long lasting, high quality print results, note the following points. ❏ Do not rub or scratch the printed surface. If it is rubbed or scratched, the ink may peel off. ❏ Do not touch the printed surface, as this may remove the ink. ❏ Make sure printouts are completely dry before folding or stacking, as otherwise discoloration or other marks may appear where the prints touch. These marks will disappear if the prints are immediately separated and dried but will become permanent if the surfaces are not separated. ❏ Avoid direct sunlight. ❏ To prevent discoloration, display and store prints as instructed in the documentation supplied with the media. Introduction 34