Epson SureColor S50670 Quick Reference Guide - Page 11

Raise the media loading lever, then pull out the media by hand and insert it into the printer.

Get Epson SureColor S50670 PDF manuals and user guides View all Epson SureColor S50670 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

Loading Media | 9 7. Raise the media loading lever, then pull out the media by hand and insert it into the printer. English Note: If the media is heavy and difficult to unroll, press the drive switch on the left roll holder. Press the switch up or down based on the orientation of the paper on the roll. You can also pull out the media manually. Printable side out Printable side in 8. Insert the media past the pressure rollers. Make sure the left edge of the media passes over the center of the square in the label on the pre-heater (the media sensor). To avoid media skew, feed extra media, then use the motor to wind it back on the roll. Caution: If the left edge of the media is not in the right position, perform steps 7 to 2 in reverse order and restart the loading process. Do not attempt to reposition the roll holders while they are inserted in the media roll.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
Loading Media
|
9
English
7.
Raise the media loading lever, then pull out the media by hand and insert it into the printer.
Note:
If the media is heavy and difficult to unroll, press the
drive switch on the left roll holder. Press the switch up or
down based on the orientation of the paper on the roll. You
can also pull out the media manually.
8.
Insert the media past the pressure rollers.
Make sure the left edge of the media passes over the center of the square in the label on the pre-heater
(the media sensor). To avoid media skew, feed extra media, then use the motor to wind it back on the
roll.
Printable
side out
Printable
side in
Caution:
If the left edge of the media is not in the
right position, perform steps 7 to 2 in reverse
order and restart the loading process. Do not
attempt to reposition the roll holders while they
are inserted in the media roll.