Epson TM-m30II Technical Reference Guide TM-m30II-N - Page 101
Printing Specifications, Special Font
![]() |
View all Epson TM-m30II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Appendix Printing Specifications Printing method Dot density Printing width 48/35 characters mode 42/32 characters mode The number 48/35 characters mode of characters 42/32 characters mode Line spacing Maximum print speed*2 Multi-tone graphics printing Font A (12 × 24) Font B (10 × 24) Font C (9 × 17) Special Font A Special Font B Kanji Font A (24 × 24) Kanji Font B (20 × 24) Font A (12 × 24) Font B (10 × 24) Font C (9 × 17) Special Font A Special Font B Kanji Font A (24 × 24) Kanji Font B (20 × 24) Paper width 58 mm Paper width 80 mm Thermal line printing 203 × 203 dpi 52.5 ± 0.2 mm {2.07 ± 72.0 ± 0.2 mm {2.83 ± 0.01"}, 420 dots 0.01"}, 576 dots 52.5 ± 0.2 mm {2.07 ± 0.01"}, 420 dots 35 42*1 68.3 ± 0.2 mm {2.69 ± 0.01"}, 546 dots 48*1 57 46 64 35 48 46 64 17*1 24*1 Japanese: 21 Korean: 26 Japanese: 28 Korean: 36 32 42 42 54 46 60 35 45 46 60 16 21 Japanese: 21 Korean: 26 Japanese: 27 Korean: 34 3.75 mm {1/5"} (initial setting, programmable by command) 250 mm/s {9.84"/s}*3 Up to 16 shades of gray (when printed on Epson specified paper) dpi: dots per inch *1: Initial setting *2: When the printer prints with the standard print density level at 25°C {77°F} and 24V. *3: The maximum is 100 mm/s {3.94"/s} when printing ladder barcodes, 2-dimensional symbols, or multi-tone graphics. • The print speed changes automatically depending on the applied voltage and head temperature. • If the data transmission speed is slower than the maximum print speed, the print speed may fluctuate and the print result may become shaded and/or dot displacement in paper feeding may occur. Furthermore, if the data transmission speed is much slower than the maximum print speed, intermittent printing will occur. 101
![](/manual_guide/products/epson-tmm30ii-technical-reference-guide-tmm30iin-a7c3948/101.png)