Epson TM-m30II Technical Reference Guide TM-m30II-N - Page 26
Simple Setup for Wireless LAN
View all Epson TM-m30II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Chapter 1 Product Overview Simple Setup for Wireless LAN This printer comes with a mode (SimpleAP) that allows printers to connect with a smart device or a computer without requiring a wireless access point. This allows you to easily setup a wireless LAN for the printer by using a printer settings tool (Epson TM Utility, EpsonNet Config, or EpsonNet Config (Web version)) even without a network environment such as access points. When the wireless LAN settings of the printer have not been changed from the factory default, and the printer is turned on, the printer automatically enters the Simple AP mode and prints the following information. If you have changed the wireless LAN settings from the factory default, start the printer according to the settings to connect the printer to an access point. SimpleAP Start SSID : EPSON_Printer Encryption Type : WPA2-PSK Passphrase : 12345678 IP Address : 192.168.192.168 MAC Address : xx-xx-xx-xx-xx-xx 26