Epson TM-m30II Technical Reference Guide TM-m30II-N - Page 33
Set the paper width in software setting mode., For information about the software setting mode, see
![]() |
View all Epson TM-m30II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Chapter 2 Setup After using the printer for an extended period at 58 mm, do not return to 80 mm. Parts of the print head that do not normally touch the paper may be damaged by the platen roller, and the autocutter may wear out. 3 Set the paper width in software setting mode. For information about the software setting mode, see "Software Settings" on page 48. 33
![](/manual_guide/products/epson-tmm30ii-technical-reference-guide-tmm30iin-a7c3948/33.png)
33
Chapter 2
Setup
3
Set the paper width in software setting mode.
For information about the software setting mode, see
"Software Settings" on page 48.
After using the printer for an extended period at 58 mm, do not return to 80 mm. Parts of the print
head that do not normally touch the paper may be damaged by the platen roller, and the
autocutter may wear out.