Epson TM-m30II Technical Reference Guide TM-m30II-N - Page 58
Setup using EpsonNet Config, Start up EpsonNet Config.
![]() |
View all Epson TM-m30II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Chapter 3 Advanced Usage Setup using EpsonNet Config Execute EpsonNet Config, select the target printer from the displayed device list, then check and change the settings. If the printer is still set to factory defaults, the printer's MAC address is listed up, even if the computer does not have the same network address. • The initial setting uses an IP address for the printer provided by a DHCP server. Since you cannot complete setup if there are conflicting IP addresses on the network, make sure that there are no other devices on the network that conflict with the IP address provided by the DHCP server. If a DHCP server is not available, a fixed IP address (192.168.192.168) is set approximately one minute after turning on the printer. Also, if the Ethernet cable is not connected, connect the Ethernet cable and then run this process. • When DHCP is enabled, the provided IP address is printed automatically. However, if the Ethernet cable is not connected, and the Wireless LAN unit is not installed, printing is not performed. 1 Connect the printer to the same network as the computer where you installed EpsonNet Config. 2 Start up EpsonNet Config. The tool automatically detects printers connected to the network and displays a list. It may take up to a minute for the printer to be displayed in the list. If it is not displayed, check that [Filter] is set to "(All)" or "Network-connected devices", then click [Refresh]. Or, select [Tools], then [Option], and check the settings of [Search Parameters]. 3 Select the target printer, then click [Configuration]. If you cannot determine the target printer from the product name or the IP address, use the MAC address. You can check the printer's MAC address on the status sheet. 4 Change the printer's settings based on the network setting information you received from the network administrator. Select an item from the menu and change the setting. 5 Once you set the necessary items, click [Transmit]. The changed contents are sent to the printer and the printer settings are changed. For details about EpsonNet Config, see the manual (operation guide) installed together with the tool or the online help. 58
![](/manual_guide/products/epson-tmm30ii-technical-reference-guide-tmm30iin-a7c3948/58.png)