Epson TM-m30II Technical Reference Guide TM-m30II-N - Page 50
Paper width, Release condition of receive buffer BUSY
![]() |
View all Epson TM-m30II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Chapter 3 Advanced Usage Release condition of receive buffer BUSY • Releases when the remaining receive buffer capacity becomes 256 bytes (initial setting) • Releases when the remaining receive buffer capacity becomes 138 bytes This function is enabled only when Receive buffer capacity is set to 4KB. Select paper out detector enabled for paper out signal output • Roll paper out detector (initial settings) • Disabled Error signal settings • Enabled (initial setting) • Disabled Pre-feed before next print • Disabled (initial setting) • Enabled • When using this function, the top margin is approximately 10.5 mm. • This setting becomes invalid if you change the "Amount of top margin by backfeed" setting from the initial setting (9.5mm (no backfeed)). Roll paper near-end detection • Disabled (initial setting) • Enabled Network tethering • Disabled (initial setting) • Enabled The initial setting varies depending on the product specification. Paper width • 80mm (initial setting) • 58mm 50
![](/manual_guide/products/epson-tmm30ii-technical-reference-guide-tmm30iin-a7c3948/50.png)