Epson TM-m30II Technical Reference Guide TM-m30II-N - Page 34
Connecting the Optional Wireless LAN Unit
![]() |
View all Epson TM-m30II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Chapter 2 Setup Connecting the Optional Wireless LAN Unit The optional Wireless LAN cable set (OT-WL02/OT-WL05/OT-WL06) enables you to use the product with a Wi-Fi connection. For more information, refer to Technical Reference Guide of the Wireless LAN cable set. • Be sure to turn off the printer when connecting the Wireless LAN unit. • Depending on the installation conditions of the printer and the routing for cables connected to it, the status of the radio waves for the Wireless LAN unit may decline. If this does happen, use an extension cable. • The combinations of wireless LAN cable set and firmware version you can use with this product are as follows. Wireless LAN Cable Set OT-WL02 OT-WL05 OT-WL06 Firmware Version 3.03A ESC/POS or later 3.03B ESC/POS or later 3.03A ESC/POS or later 3.03B ESC/POS or later You can perform a firmware update by using the TM-m30II Firmware Updater if using a Windows computer, or by using the Epson TM Utility if using a smart device. For details, see "Utilities" on page 84. • When connecting a Wireless LAN unit, use the connector shown in the illustration below in order to prevent the unit from contacting with the printer case. A: Printer models that are not equipped with a microSD card slot B: Printer models that are equipped with a microSD card slot 34
![](/manual_guide/products/epson-tmm30ii-technical-reference-guide-tmm30iin-a7c3948/34.png)