Epson TM-m30II Technical Reference Guide TM-m30II-N - Page 78
Connect the iOS device to the printer using a Lightning to USB cable., On the iOS device
![]() |
View all Epson TM-m30II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Chapter 3 Advanced Usage 4 Connect the iOS device to the printer using a Lightning to USB cable. Make sure to connect the cable to the USB-A Device Charging connector (white connector). 5 On the iOS device, tap [Settings] - [Ethernet], and then check that an IP address has been set. • If [Ethernet] does not appear in [Settings] of the iOS device, the tethering function of the printer might have been disabled. See "Enabling the Tethering Function" on page 76 to enable the tethering function. • If a DHCP server is not used in the network, set the IP address and subnet mask manually. • To print from the iOS device, select one of the interfaces; USB or network, in the application. 78
![](/manual_guide/products/epson-tmm30ii-technical-reference-guide-tmm30iin-a7c3948/78.png)
78
Chapter 3
Advanced Usage
4
Connect the iOS device to the printer using a Lightning to USB cable.
Make sure to connect the cable to the USB-A Device Charging connector (white connector).
5
On the iOS device, tap [Settings] - [Ethernet], and then check that an IP address has
been set.
•
If [Ethernet] does not appear in [Settings] of the iOS device, the tethering function of the printer
might have been disabled. See
"Enabling the Tethering Function" on page 76
to enable the
tethering function.
•
If a DHCP server is not used in the network, set the IP address and subnet mask manually.
•
To print from the iOS device, select one of the interfaces; USB or network, in the application.