Epson XP-300 User Guide - Page 160
Product Status Messages - how to change ink cartridge
View all Epson XP-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
Product Status Messages You can often diagnose problems with your product by checking the messages on its LCD screen. LCD code Condition/solution (E-01) A fatal error has occurred. Turn the product off and then back on again. If the error continues, check for a paper jam. If there is no paper jam, contact Epson for support. (W-02) Paper is jammed in the product. Remove the jammed paper, then turn the product off and back on again. (W-03) Paper is jammed in the product. Remove the jammed paper, then press the start button to clear the error. (W-10) Ink cartridges are installed incorrectly. Replace or reinstall the cartridge indicated on the LCD screen. (W-12) An ink cartridge indicated on the LCD screen is not recognized. Replace the ink cartridge. Epson recommends using genuine Epson ink cartridges. (E-10) An ink pad needs service. The ink pad is at the end of its service life. Turn off the product and contact Epson for support. (W-13) An ink pad is nearing the end of its service life. Contact Epson for support. (To continue printing, press the start button.) (E-02) A fatal scanner error has occurred. Turn the product off and then back on again. If the error continues, contact Epson for support. (I-22) To establish a wireless connection using an access point, press the button on the access point or click the button on the access point's wireless settings screen displayed on your computer screen. (I-23) Enter the PIN code displayed on the LCD screen into the access point or computer within two minutes. If you wait longer than two minutes, a time-out error occurs, the code changes, and you must enter a new code. (I-31) To make wireless connection settings from your computer, insert your product CD into your computer and follow the on-screen instructions. (I-60) Your computer may not support WSD (Web Services for Devices). The Scan to PC (WSD) function is available only for computers running English versions of Windows 7 or Windows Vista. Parent topic: Solving Problems 160